|
I can do the leak test and install the MBC, but you'll have to figure out how to tie in the alky to the boost system. I didn't do that part, but if you have an SMC kit, then we could mimic my setup. I have a multi-pronged tee fitting for all my things that need a vaccuum source.
PM'd with address and phone numbers. Call me that afternoon to let me know when you're coming over. I'll probably already have someone at the house doing the same things. If we can't figure out the boost tie-in to the alky, the guys at the shop should be able to figure it out.
I recommend NGK BR8ES gapped to .024.
____________________________
11.51@117.72 - PMI
11.62@116.60 - Bandi
|
