Mitsubish Lancer Evolution Forum - EvoTuners.net

jaymzz · 10-20-2006, 08:26 PM

This was my first time drag racing my Evo. I was wondering how to launch, shift etc. I am new to drag racing, so any suggestions would help. Thanks. Here is a video. http://video.google.com/videoplay?do...91770265&hl=en
My best was
60' 2.017
1/8 8.410
1/4 12.99
mph 104.83
And my best trap speed was 108.34

JORGE · 10-21-2006, 06:50 AM

is your evo stock or did you have some mods??????

jaymzz · 10-21-2006, 02:55 PM

I have a Turbo back, Perrin IC, BOV, and a UnichipQ. But I am running on a stock Evo tune and a stock clutch.

Warrtalon · 10-21-2006, 07:59 PM

What is a UnichipQ? It sounds like a tuning device, but you said stock Evo tune.

The 60' is terrible, but the power isn't bad if you trapped 108.xx. With a decent 60', you'd be running mid-12s. For reference, I trap 108-109 consistently at altitude, and my ETs are 12.3-12.4 each time, so that's an idea of where you can get. You need an MBC, fuel pump, and flash to be in good shape. The BOV and FMIC are currently useless, but my guess is you didn't get them for performance based on the avatar.

jaymzz · 10-21-2006, 09:37 PM

I put the IC and BOV due to having a wreck. They needed replaced, so that is why I have them. I am getting rid of the UnichipQ, and getting a flash next week. The Unichip comes with a base map, and that is what I have been running on. I am also getting a MBC and will look into a fuel pump. Thanks Warrtalon.

Warrtalon · 10-22-2006, 01:21 PM

Should be in good shape after those changes.

As for the weird Unichip thing that I've never heard of, if it has a base map, then that usually means a base TUNED map, not a stock map. We refer to base flashes as flashes that are generically made according to your mods, but not custom tuned in person. Therefore, I would consider a base map to be a non-custom tuned map.

jaymzz · 10-22-2006, 04:15 PM

Thanks.

jaymzz · 10-24-2006, 08:52 PM

What does everyone have there launch set at?

tobz · 12-15-2006, 10:05 PM

6000.

06evors · 12-16-2006, 08:31 AM

Launching an Evo is a little more complicated than revving it up and dumping the clutch so you ran times that are expected but will only get better with the suggestions above and more practice. A mail in dynoflash put mine to 5900 rpm instead of the stock 5500.

Jared

Warrtalon · 12-18-2006, 06:22 AM

6000rpm, but I can change it to whatever I want, whenever I want using EcuFlash. I change it at the track depending on the conditions and stickiness.