4B11 Info from wikipedia.org - Mitsubishi Evolution Forums: Mitsubishi Lancer Forum
Mitsubishi Evo Forum Mitsubishi Evo Forum Header Right
 

» Auto Insurance
» Featured Product
Wheel & Tire Center

Go Back   Mitsubishi Evolution Forums: Mitsubishi Lancer Forum > Evolution X > Evo X Discussion
Register Forum Active Topics (T) Gallery Auto Loans Classifieds Garage Mark Forums Read Auto EscrowInsurance Advertise

Evo X Discussion General Discussion about the Mitsubishi Evo X

EvoTuners.net is the premier Mitsubishi Evolution Forum on the internet. Registered Users do not see the above ads.
Reply
 
LinkBack Thread Tools
Old 09-02-2010, 07:43 PM   #1 (permalink)
Moderator
 
Larryboy's Avatar
 
Club Region: Mid Atlantic
Registered: Feb 2010
Posts: 147
Reputation: You can trust this leader of the site
4B11 Info from wikipedia.org

Manufacturer Mitsubishi Motors
Also called GEMA "World Engine"
Production 2005present
Predecessor Mitsubishi 4G6 engine
Cylinder block alloy Aluminium die cast
Cylinder head alloy Aluminium die cast
Valvetrain Direct acting DOHC, 16 valves, continuously variable MIVEC intake and exhaust valve timing


The Mitsubishi 4B1 engine is a range of all-alloy straight-4 engines built at Mitsubishi's Japanese "World Engine" powertrain plant in Shiga on the basis of the Global Engine Manufacturing Alliance (GEMA).[1][2][3] Although the basic designs of the various engines are the same, their exact specifications are individually tailored for each partner (Chrysler, Mitsubishi, and Hyundai). The cylinder block and other basic structural parts of the engine were jointly developed by the GEMA companies, but the intake and exhaust manifolds, the cylinder heads intake and exhaust ports, and other elements related to engine tuning were independently developed by Mitsubishi.[1]

All engines developed within this family have aluminium cylinder block and head, four valves per cylinder, double overhead camshaft layouts, and MIVEC continuous variable valve timing. The 4B1 engine family is the first to have the continuously variable valve timing MIVEC system applied not only to its intake valves but also to its exhaust valves. The intake and exhaust cam timing is continuously independently controlled and provide four optimized engine operating modes.[1][4]

Contents [hide]
1 4B10
1.1 Specifications
1.2 Applications
1.3 Characteristics
2 4B11
2.1 Specifications
2.2 Applications
2.3 Characteristics
3 4B11T
3.1 Specifications
3.2 Applications
3.3 Characteristics
4 4B12
4.1 Specifications
4.2 Applications
4.3 Characteristics
5 See also
6 References

[edit] 4B10
[edit] Specifications
Engine type Inline 4 cylinder DOHC 16v, MIVEC
Displacement 1.8 L (1798 cc)
Bore 86 mm
Stroke 77.4 mm
Compression ratio 10.5:1
Fuel system ECI multiple

Peak power 105 kW (143 PS) at 6000 rpm
Peak torque 177 Nm (130 ftlbf) at 4250 rpm

[edit] Applications
2007 Mitsubishi Lancer
2010 Mitsubishi RVR
[edit] Characteristics
[edit] 4B11
[edit] Specifications
Engine type Inline 4 cylinder DOHC 16v, MIVEC
Displacement 2.0 L (1998 cc)
Bore 86 mm
Stroke 86 mm
Compression ratio 10:1
Fuel system ECI multiple

Peak power 108-114 kW (147-155 PS) at 6000 rpm
Peak torque 198 Nm (146 ftlbf) at 4250 rpm

[edit] Applications
2007 Mitsubishi Lancer
2009 Mitsubishi Outlander (Facelift Europe)
[edit] Characteristics
The engines's bore and stroke both measure 86.0 mm, which engineers refer to as square. According to Mitsubishi, the new cylinder dimensions contribute to a free-revving character (6,500 rpm redline, 8000 rpm final), linear power delivery and wide torque curve. Mitsubishi used a timing chain instead of a belt for better reliability, iridium spark plugs to lower emissions and to help extend major service intervals for lower cost of ownership. To reduce weight, Mitsubishi used a plastic cam cover and intake manifold and double-layer stainless steel exhaust manifold. The exhaust manifold has a rear location on the transverse engine, compared to the front location for the previous engine, yielding important benefits such as better emissions performance. To lower vibration, Mitsubishi used a 4-point inertial axis system with cylindrical hydraulic engine mounts on the left and right sides. A lightweight, high-rigidity squeeze-cast aluminium bracket on the right side mount (engine side) lowers engine noise under acceleration. A lightweight, high-rigidity steel plate bracket on the left side mount (transmission side) lowers gear noise. A custom-tuned insulator was developed for the front and rear mounts to help control both idle vibration and acceleration shock.[4]

[edit] 4B11T
[edit] Specifications
Engine type Inline 4 cylinder DOHC 16v, Turbo MIVEC
Displacement 2.0 L (1998 cc)
Bore 86 mm
Stroke 86 mm
Compression ratio 9:1
Fuel system ECI multiple

Peak power 206 kW (280 PS) at 6500 rpm &152hp @6000rpm(Japanese market)
217 kW (291 PS) at 6500 rpm (US market)
177 kW (240 PS) (Lancer Ralliart)
217 kW (295 PS) at 6500 rpm (European market)
Peak torque 422 Nm (311 ftlbf) at 3500 rpm (Japanese market)
407 Nm (300 ftlbf) at 4400 rpm (US market)
343 Nm from 2500 to 4725 rpm (353 Nm at 3000 rpm) (Lancer Ralliart)
366 Nm at 3500 rpm (European market)

[edit] Applications
2007 Mitsubishi Lancer Evolution
2008 Mitsubishi Lancer Ralliart (detuned)
[edit] Characteristics
Peak power and torque figures of 206 kW and 422 Nm are for Japanese market Lancer Evolution models[5] and figures of 217 kW and 407 Nm are for US market models.[6]

The 4B11T is the first engine in the Lancer Evolution series that uses a die-cast aluminium cylinder block versus the cast-iron block used in the previous turbocharged 4G63 engine that powered all previous models. The engine weight has been reduced by 12 kg (26 lb) compared to the 4G63, even with the addition of a timing chain instead of a belt and MIVEC continuous variable valve timing on both the intake and exhaust camshafts (the 4G63 had MIVEC valve timing & lift switching type on the intake only). A revised turbocharger offers up to 20-percent quicker response at lower engine speeds compared to previous 4G63. The 4B11T offers a broader torque curve, producing more torque than the 4G63 at all engine speeds, helped by the engine's square bore and stroke design (both measure 86.0 mm). Redline starts at 7,000 rpm, with a fuel cutout at 7,600 rpm to protect the engine.[6]

A semi-closed deck structure, an integrated ladder frame and four-bolt main bearing caps contribute to engine strength, durability and lower NVH levels. Unlike the 4G63, the 4B11T does not use a balancer shaft. The semi-floating pistons of the 4G63 have been replaced with a fully floating pistons for the 4B11T. Aluminium is also used for the timing chain case and cylinder head cover. The engine features an electronically controlled throttle, an isometric short port aluminium intake manifold and the stainless steel exhaust manifold is positioned at the rear of the engine. The use of a direct-acting valvetrain eliminates the need of the roller rocker arm configuration previously used in the 4G63. The 4B11T features built-up hollow camshafts and its valve stem seals are integrated with the spring seats. The internal components of the 4B11T engine have been reinforced to withstand high levels of boost.[6]

[edit] 4B12
[edit] Specifications
Engine type Inline 4 cylinder DOHC 16v, MIVEC
Displacement 2.4 L (2359 cc)
Bore 88 mm
Stroke 97 mm
Compression ratio 10.5:1
Fuel system ECI multiple

Peak power 125 kW (170 PS) at 6000 rpm
Peak torque 232 Nm (171 ftlbf) at 4100 rpm

[edit] Applications
2005 Mitsubishi Outlander
2005 Mitsubishi Lancer Ralliart
2004 Mitsubishi Grandis
2007 Mitsubishi Delica
2008 Mitsubishi Lancer
2008 Citron C-Crosser
2008 Peugeot 4007
2009 Mitsubishi Lancer Sportback GTS
[edit] Characteristics
The cylinder head intake and exhaust ports and intake and exhaust manifolds are shape optimized for better volumetric efficiency. Mitsubishi lowered the friction of the engine by including elastic grinding of the valve stems, adopting a high-efficiency shroud equipped plastic impeller in the water pump and using 0W-20 low-viscosity oil. Mitsubishi increased the combustion efficiency by optimizing the design of the cylinder head intake and exhaust ports, by incorporating the MIVEC system on both intake and exhaust valves and by using injectors that give an ultra micro droplet fuel spray. To lower the engine's weight, Mitsubishi used die-cast aluminium for the cylinder block, plastic for the cylinder head cover and intake manifold, and stainless steel for the exhaust manifold. The engine features a compact balancer shaft module with an integrated oil pump. A silent chain is used to drive the camshafts. The compact balancer module, the silent chain, the stable combustion yielded by the intake and exhaust MIVEC system, and high rigidity designs for the cylinder head and cylinder block realize low vibration and noise.[1]
Offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 09-02-2010, 07:57 PM   #2 (permalink)
Moderator
 
Larryboy's Avatar
 
Club Region: Mid Atlantic
Registered: Feb 2010
Posts: 147
Reputation: You can trust this leader of the site
Photobucket

Photobucket

Photobucket

Photobucket

Photobucket

Photobucket

Photobucket

Photobucket

Photobucket
Offline   Reply With Quote
Sponsored Links
Advertisement
 
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On


Powered by vBadvanced CMPS v3.2.2

All times are GMT -8. The time now is 06:41 AM.


vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
© 2007 AutoForums.com - EVOtuners.net - All Rights Reserved.

Powered by vBulletin®. Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.3.2
Garage Plus vBulletin Plugins by Drive Thru Online, Inc.