Mitsubishi Lancer Evolution Forums banner

exhaust question

2346 Views 6 Replies 3 Participants Last post by  Orville
I just wanted to know if the evo exhaust can fit on the base lancer
1 - 7 of 7 Posts
From the Lacer exhausts I've seen, they look nothing like an Evo exhaust. Why would you want our sorry stock exhausts anyway? The piping diameter sucks with a restrictive muffler and resonators. Contact a vendor for quality parts;
http://www.evotuners.net/forums/faq.php?faq=sponsors#faq_site_sponsors
isnt it 2.5, I'm on 2 right now
I ditched my cat-back, but I still have the stock cat and downpipe. I'll measure them tonight. and they are not pretty.
Stock EVO exhaust is about 2 3/8" from what I remember and is press bent just like the regular lancer exhaust. I don't even think the regular lancer and EVO use the same mounting points for the exhaust though, so you may have some trouble getting it to go on if you try to use it. I know there are places out there making aftermarket systems for the Lancer though.

Keith
2.25 :thumbdown
Stock DP and cat inlets and outlets, so the piping is even smaller at the crushed bends.
If your on a serious budget, by some aluminized mandrel bends, flanges, and a Magnaflow muffler. Take it all to a muffler shop and have them weld it all up for you.
http://www.roadraceengineering.com/mandrelbends.htm
http://www.roadraceengineering.com/exhaustparts.htm
http://www.roadraceengineering.com/flangesandgaskets.htm
Fourdoor said:
Stock EVO exhaust is about 2 3/8" from what I remember and is press bent just like the regular lancer exhaust. I don't even think the regular lancer and EVO use the same mounting points for the exhaust though, so you may have some trouble getting it to go on if you try to use it. I know there are places out there making aftermarket systems for the Lancer though.

Keith
well, its an 05 and i see that they do use the same points...at least from the cat back
I had a neon before this 03...and the srt fit right on that as well
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top